Delta make PLC with HMI.
Program for drilling single & continuous cycle
Stepper motor – 870 kg-cm
Helical gear box
| Standard specification | DB28A |
|---|---|
| Drilling Capacity | 20 mm |
| Spindle Nose Taper | MT3 |
| Spindle Stroke max. for Drilling | 125 mm |
| No. of Spindle Speed | 8 |
| Range of Spindle Speed | 112-2800 rpm |
| Mode of spindle feed for drilling | Automatic |
| Column Diameter | 80 mm |
| Spindle to column face | 240 mm |
| Clamping area on work table | 240 x 240 mm |
| Spindle face to worktable | 308 mm |
| T Slot on Work Table(size x Qty) | 12 x 2 mm x Nos. |
| Spindle face to Base Plate | 600 mm |
| Base Plate Working Area | 250 x 250 mm |
| T Slot on Base | 14 x 2 mm x Nos. |
| Main Motor Power | 2 HP |
| Net Weight | 170 kg |
| Dimensions | 380x700x1130 mm |
| Standard specification | DB23A |
|---|---|
| Drilling Capacity | 15 mm |
| Spindle Nose Taper | MT2 |
| Spindle Stroke max. for Drilling | 125 mm |
| No. of Spindle Speed | 8 |
| Range of Spindle Speed | 112-2800 rpm |
| Mode of spindle feed for drilling | Automatic |
| Column Diameter | 80 mm |
| Spindle to column face | 240 mm |
| Clamping area on work table | 240 x 240 mm |
| Spindle face to worktable | 308 mm |
| T Slot on Work Table(size x Qty) | 12 x 2 mm x Nos. |
| Spindle face to Base Plate | 600 mm |
| Base Plate Working Area | 250 x 250 mm |
| T Slot on Base | 14 x 2 mm x Nos. |
| Main Motor Power | 1 HP |
| Net Weight | 170 kg |
| Dimensions | 380x700x1130 mm |